Designed for medium voltage motors, the 369 delivers simple setup configuration through the use of the Motor Settings Auto-Configurator, advanced graphical diagnostics with the Motor Health Report, comprehensive communications with multiple communication options and complete traceability of all setting changes with the Security Setting Change History Report, providing unparalleled motor protection for medium sized AC motors.
Enhanced Thermal Model
Complete Asset monitoring
Reduce troubleshooting time and maintenance costs
Multiple communication protocols
Simplified programming with the EnerVista™ 369 Motor Settings Auto-Configurator
Optional Conformal coating
Field upgradable settings and firmware
Suitable for hazardous locations
Safe and reliable motor re-start on “Down Hole” pump applications
User definable parameters and data size for DeviceNet polling
User definable parameters and data size for Profibus DPV1 cyclic data
Motor learned data on historical start characteristics
Protection and control for medium sized AC motors
“Down Hole” pump applications
Suitable for applications involving Variable Frequency Drives
Two Speed motor application
Enhanced thermal model
Stall / Jam protection
Variable lockout time
Overtemperature 12 RTDs (R option)
Starts/hour, time between starts
Voltage Phase Reversal (M option)
Current based phase reversal
The 369 is a digital motor protection system designed to protect and manage medium sized AC motors and their driven equipment. It contains a full range of selectively enabled, self contained protection and control elements as detailed in the Functional Block Diagram and Features table.
Fault diagnosis, - Event Record, Oscillography, Motor Starting Data Logger
Motor Health Report
Statistical information & learned motor data
Voltage/frequency/power display (M option)
4 analog outputs (M option)
The 369 offers a choice of optional monitoring and metering functions including:
Metering (Option M)
Motor Start Data Logger
Track changes in motor starting characteristics, identifying potential failures before they become critical
Troubleshoot faults that occur during motor starts using the Motor Start Data logger.
Motor Health Report (E Option) "See" how the motor is operating with comprehensive graphs and tables
Front Panel RS232 port for programming and troubleshooting
Optional embedded Ethernet port
Optional Profibus DP/DPV1 or DeviceNet via dedicated port
Multiple Protocols - Modbus RTU, Modbus TCP/IP
A front RS232 port is provided for downloading setpoints and interrogating the relay using the EnerVista™ 369.
Three independent rear RS485 ports offer the customer flexibility and performance for their communication network. The 369 can communicate at baud rates up to 19,200 bps using the industry standard Modbus® RTU protocol. Fiber optic (option F) Profibus interface (option P), DeviceNet (option D), and Ethernet (option E) ports are also available. The optional direct connect RJ45 Ethernet port can be used to connect the 369 to 10 Mbps Ethernet networks. The communication system of the 369 is designed to allow simultaneous communication via all ports.
Using Ethernet as the physical media to integrate the 369 to Local or Wide Area Networks replaces a multidrop-wired
network (e.g., serial Modbus®), and eliminates expensive leased or dial-up connections, reducing operating costs.
The EnerVista™ Suite is an industry leading set of software programs that will simplify every aspect of using the 369 relay. Tools to monitor the status of the motor, maintain the relay, and integrate information measured by the 369 into HMI or SCADA monitoring systems are available. Also provided are the utilities to analyze the cause of faults and system disturbances using the powerful waveform and Sequence of Event viewers that come with the EnerVista™ 369 Setup Software that is included with each relay. Learn More
Multilin devices and relays are designed with simple but powerful security to enable reliability and compliance for virtually any project or implementation. With support for multi-level permissions and multi-factor supervisory controls, Multilin devices can help you manage the integrity of your system during commissioning, testing, implementation, and beyond. The SR Family provides separate authentication for settings and commands to the system. In addition, as discrete authentications for local and remote access, it also provides a supervisory control factor that can lock or unlock a device for configuration changes and other modifications.
Motor Settings Auto-Configurator
Automatically generate a complete settings file, eliminating the need to manually program hundreds of individual protection settings
Auditing and Reporting
With the Security Audit Trail reporting feature and support for Event logging of key activities such
as configuration changes, Multilin devices can help ensure device and protection system integrity,
and perform forensic auditing of activities and changes for compliance.
Seamless upgrade for existing Drawout Multilin 269 Motor Management Relays
Reduce system downtime utilizing the existing Multilin 269 Motor Management Relay drawout chassis
Reduce maintenance & operational costs - eliminates the need for mounting kits, re-work to existing cutouts and re-wiring of the chassis
Upgrade with ease using automated setting file conversion tool
Take advantage of newer, more advanced hardware and feature set